MATERIAL DESCRIPTION

AISI 316L is a molybdenum-alloyed austenitic chromium-nickel steel with improved machinability. The grade is used for a wide range of industrial applications where steels of types ASTM 304/304L have insufficient corrosion resistance. Round bar is supplied in solution annealed and peel turned condition.

Applications

The austenitic stainless steel AISI 316L shows good acid resistance. Material AISI 316L is used in the chemical industry, apparatus engineering, sewage plants and piping industry.

Heat Treatment
Solution annealed and quenched in air or water.

Weldability
Very good.

Chemical Composition (Specific for Plates)

Weight % C Mn P S Si Cr Ni Mo N
Min.            16,5  10,0  2,00  
Max.  0,030  0,75  2,00  0,015  0,045  18,5  13,0  2,50  0,10

 

Reference Standards

General:

  • Norsok M-650 Ed.4 qualified manufacturers
  • PED 2014/68/EU Annex I section 4.3
  • AD2000 W0 (W2/W10)
  • NACE MR0175/ISO 15156-3 and NACE MR0103/ISO 17945

Plate, sheet and coil:

  • ASTM A240, EN 10028-7, EN 10088-2, EN 10088-4, Norsok M-630 MDS S15

Bar and forging:

  • ASTM A276, ASTM A479, ASTM A182, EN 10088-3, Norsok M-630 MDS S14/S17

Other products:

  • As per applicable ASTM and/or EN standards and Norsok M-630 MDS
  • Plates available as Outokumpu Circle Green® with the lowest carbon footprint in the industry

Mechanical Properties (Typical)

  Yield strength Rp0.2,
MPa		 Yield strength Rp1.0,
MPa		 Tensile strength Rm,
MPa		 Elongation
[%]		 Hardness
[HB]
PLATE CR (COIL)  ≥ 240  ≥ 270  530 – 680  ≥ 40  ≤ 217
PLATE HR (COIL)  ≥ 220  ≥ 260  530 – 680  ≥ 40  ≤ 217
PLATE (QUARTO)  ≥ 220  ≥ 260  520 – 670  ≥ 45  ≤ 217

Cold Rolled Plate Stock (Finish 2B)

MEASUREMENTS KG/PLATE
0,5 x 1000 x 2000 mm 8.0
0,6 x 1000 x 2000 mm 9.6
0,7 x 1000 x 2000 mm 11.2
0,7 x 1250 x 2500 mm 17.5
0,8 x 1000 x 2000 mm 12.8
0,9 x 1000 x 2000 mm 14.4
1 x 1000 x 2000 mm 16.0
1 x 1250 x 2500 mm 25.0
1 x 1500 x 3000 mm 36.0
1,25 x 1000 x 2000 mm 20.0
1,25 x 1250 x 2500 mm 31.3
1,25 x 1500 x 3000 mm 45.0
1,5 x 1000 x 2000 mm 24.0
1,5 x 1250 x 2500 mm 37.5
1,5 x 1500 x 3000 mm   –  Available as Circle Green 54.0
2 x 1000 x 2000 mm 32.0
2 x 1250 x 2500 mm 50.0
2 x 1500 x 3000 mm   –  Available as Circle Green 72.0
2 x 2000 x 4000 mm 128.0
2 x 2000 x 6000 mm 192.0
2,5 x 1000 x 2000 mm 40.0
2,5 x 1250 x 2500 mm 62.5
2,5 x 1500 x 3000 mm 90.0
3 x 1000 x 2000 mm 48.0
3 x 1250 x 2500 mm 75.0
3 x 1500 x 3000 mm   –  Available as Circle Green 108.0
3 x 2000 x 4000 mm 192.0
3 x 2000 x 6000 mm 288.0
4 x 1500 x 3000 mm   –  Available as Circle Green 144.0
5 x 1500 x 3000 mm   –  Available as Circle Green 180.0
6 x 1500 x 3000 mm   –  Available as Circle Green 216.0

 

 

Cold Drawn H9 Round Bar Stock

DIA KG/M
3 mm 0.06
4 mm 0.10
5 mm 0.15
6 mm 0.23
8 mm 0.40
10 mm 0.63
12 mm 0.91
13 mm 1.04
14 mm 1.21
16 mm 1.61
18 mm 2.00
19 mm 2.27

 

Hot Rolled Plate Stock (Finish 1/1D)

MEASUREMENTS KG/PLATE
4 x 1000 x 2000 mm 64.0
4 x 1250 x 2500 mm 100.0
4 x 1500 x 3000 mm 144.0
4 x 2000 x 4000 mm 256.0
4 x 2000 x 6000 mm 384.0
5 x 1000 x 2000 mm 80.0
5 x 1250 x 2500 mm 125.0
5 x 1500 x 3000 mm 180.0
5 x 2000 x 4000 mm 320.0
5 x 2000 x 6000 mm 495.0
6 x 1000 x 2000 mm 96.0
6 x 1250 x 2500 mm 150.0
6 x 1500 x 3000 mm 216.0
6 x 2000 x 4000 mm 384.0
6 x 2000 x 6000 mm 594.0
8 x 1000 x 2000 mm 128.0
8 x 1250 x 2500 mm 200.0
8 x 1500 x 3000 mm  –  Available as Circle Green 288.0
8 x 2000 x 4000 mm 512.0
8 x 2000 x 6000 mm 792.0
10 x 1000 x 2000 mm 160.0
10 x 1250 x 2500 mm 250.0
10 x 1500 x 3000 mm 360.0
10 x 2000 x 4000 mm 640.0
10 x 2000 x 6000 mm 990.0
12 x 1000 x 2000 mm 192.0
12 x 1250 x 2500 mm 300.0
12 x 1500 x 3000 mm 442.0
12 x 2000 x 6000 mm 1189.0
15 x 1000 x 2000 mm 248.0
15 x 1250 x 2500 mm 387.0
15 x 1500 x 3000 mm 558.0
15 x 2000 x 6000 mm 1486.0
20 x 1000 x 2000 mm 330.0
20 x 1250 x 2500 mm 516.0
20 x 1500 x 3000 mm 743.0
20 x 2000 x 6000 mm 1982.0
25 x 1000 x 2000 mm 413.0
25 x 1250 x 2500 mm 645.0
25 x 1500 x 3000 mm 928.0
25 x 2000 x 6000 mm 2478.0
30 x 1000 x 2000 mm 495.0
30 x 1250 x 2500 mm 774.0
30 x 1500 x 3000 mm 1114.0
30 x 2000 x 6000 mm 2974.0
40 x 1500 x 3000 mm 1487.0
50 x 1000 x 2000 mm 826.0

 

Round Bar Stock

DIA KG/M
20 mm 2.6
22 mm 3.1
25 mm 3.9
28 mm 5.
30 mm 5.6
32 mm 6.5
35 mm 7.7
38 mm 9.1
40 mm 10.1
45 mm 12.7
50 mm 15.7
55 mm 19.0
60 mm 22.6
65 mm 26.6
70 mm 30.8
75 mm 35.4
80 mm 40.2
85 mm 45.4
90 mm 50.9
100 mm 63.0
105 mm 68.0
110 mm 76.1
115 mm 83.1
120 mm 90.5
125 mm 96.3
DIA KG/M
130 mm 106.0
135 mm 112.2
140 mm 123.0
150 mm 141
160 mm 161
170 mm 182
180 mm 204
190 mm 223
200 mm 251
220 mm 304
225 mm 319
230 mm 333
250 mm 385
280 mm 493
300 mm 566
325 mm 651
350 mm 772
375 mm 886
400 mm 1008
425 mm 1138
450 mm 1276
500 mm 1575
550 mm 1906
600 mm 2268
650 mm 2662

 

Hollow Section Stock

MEASUREMENTS KG/M
20x20x1,5 mm 0.9
20x20x2 mm 1.2
25x25x2 mm 1.5
30x30x2 mm 1.8
30x30x3mm 2.6
40x40x2 mm 2.5
40x40x3 mm 3.6
40x40x4 mm 4.7
50x50x2 mm 3.1
50x50x3 mm 4.6
50x50x4 mm 6.
50x50x5 mm 7.3
60x60x2 mm 3.8
60x60x3 mm 5.5
60x60x4 mm 7.2
60x60x5 mm 8.9
80x50x3 mm 6.
80x80x3 mm 7.5
80x80x4 mm 9.9
80x80x5 mm 12.1
80x80x6 mm 14.3
100x50x3 mm 7.
100x50x5 mm 11.3
100x100x4 mm 12.4
100x100x5 mm 15.3
100x100x6 mm 18.1
120x120x6 mm 22.
150x150x6 mm 27.9

 

Squared Bar Stock

DIA KG/M
10 mm 0.8
12 mm 1.2
15 mm 1.8
20 mm 3.2
22 mm 3.8
25 mm 5.
30 mm 7.3
40 mm 12.8
50 mm 20.
60 mm 28.8

 

Angle Bar Stock

MEASUREMENTS KG/M
20x20x3 mm 0.99
25x25x3 mm 1.14
30x30x3 mm 1.39
40x40x4 mm 2.51
50x50x5 mm 3.8
60x60x6 mm 5.53
70x70x7 mm 7.53
80x80x8 mm 9.85
90x90x9 mm 12.4
100x100x10 mm 15.4

 

Hollow Bar Stock 

OD MM ID MM WEIGHT KG/M
32 20 4,2
32 16 5,1
36 25 4,5
36 20 5,9
36 16 6,8
40 28 5,5
40 25 6,5
40 20 7,8
45 32 6,7
45 28 8,2
45 20 10,5
50 36 8
50 32 9,7
50 25 12,1
56 40 10,2
56 36 12,1
56 28 15,2
63 50 9,9
63 45 12,2
63 40 15,4
63 36 17,3
63 32 19
71 56 12,9
71 45 19,6
71 40 22,3
71 36 24,1
75 60 13,7
75 50 21,1
75 40 26
80 63 16,4
80 50 25,3
80 45 28,3
80 40 30,9
85 67 18,5
85 55 26,8
85 45 33,5
90 71 20,6
90 63 27,1
90 56 32,3
90 50 36,1
95 75 23
95 67 29,9
95 50 42,1
100 80 24,4
100 71 32,7
100 63 39,2
100 56 42,3
106 80 32,3
106 71 40,6
106 63 47,1
106 56 52,1
112 90 30,2
112 80 40,6
112 71 48,8
112 63 55,3
118 90 39
118 80 49,4
118 71 57,6
118 63 64,2
125 100 38,3
125 90 49,8
125 80 60,2
125 71 68,5
132 106 42
132 90 61,1
132 80 71,5
132 71 79,7
140 112 47,8
140 118 39
143,3 110,1 55
140 100 63,3
140 90 74,9
140 80 85,2
150 125 47,4
150 106 74,2
150 95 87,7
150 80 103,3
160 132 56,2
160 122 71,6
160 112 85,8
160 90 112,9
170 140 63,8
170 130 80,2
170 118 98,4
170 106 114,7
170 100 122,3
180 150 68,4
180 140 86,1
180 125 110
180 100 144,4
190 160 73
190 150 91,9
190 132 123
200 170 77,6
200 160 97,6
200 150 117
200 140 134
212 170 109
212 150 148
212 130 182
224 180 121
224 140 199
236 190 133
236 150 216
250 200 153
275 200 228

Unequal Angle Stock

MEASUREMENTS

KG/M

100  X 50  X 8 mm

9.6

150  X 75  X 10 mm

18.0

 

Perforated Plate Stock

MEASUREMENTS
0,7 x 1000 x 2000 mm dia. 3 mm
0,7 x 1000 x 2000 mm dia. 5 mm
1 x 1000 x 2000 mm dia. 3 mm
1 x 1000 x 2000 mm dia. 5 mm
1,5 x 1000 x 2000 mm dia. 5 mm
2 x 1000 x 2000 mm dia. 5 mm

 

Grinded Plate Stock

MEASUREMENTS KG/PLATE
3 x 1250 x 2500 mm 75,2
1,5 x 1250 x 2500 mm 37.5
1 x 1250 x 2500 mm 25.0
2 x 1250 x 2500 mm 50.0

Hexagon Bar Stock

DIA KG/M
11 mm 0.9
13 mm 1.2
14 mm 1.4
17 mm 2.
19 mm 2.5
22 mm 3.4
24 mm 4.
27 mm 5.1
30 mm 6.2
32 mm 7.
34 mm 8.
36 mm 9.
38 mm 9.9
41 mm 11.4
46 mm 14.4
50 mm 17.
55 mm 20.6
60 mm 24.5

 

Polished Tube Stock

MEASUREMENTS KG/M
1,5 x 22 mm 0.78
1×5 x 25 mm 0.89

 

Flat Bar Stock

MEASUREMENTS KG/M
20×3 mm 0.5
20×4 mm 0.7
20×5 mm 0.8
20×6 mm 1.
20×8 mm 1.3
20×10 mm 1.6
25×3 mm 0.6
25×4 mm 0.8
25×5 mm 1.
25×6 mm 1.2
25×8 mm 1.6
25×10 mm 2.
30×3 mm 0.8
30×4 mm 1.
30×5 mm 1.2
30×6 mm 1.5
30×8 mm 2.
30×10 mm 2.4
30×12 mm 2.9
30×15 mm 3.6
40×3 mm 0.9
40×4 mm 1.3
40×5 mm 1.6
40×6 mm 2.
40×8 mm 2.6
40×10 mm 3.2
40×12 mm 3.9
40×15 mm 4.8
40×20 mm 6.5
50×3 mm 1.2
50×5 mm 2.
50×6 mm 2.4
50×8 mm 3.2
50×10 mm 4.
50×12 mm 4.8
50×15 mm 6.
50×20 mm 8.
50×25 mm 10.1
60×5 mm 2.4
60×6 mm 2.9
60×8 mm 3.9
60×10 mm 4.8
60×12 mm 5.7
60×15 mm 7.2
60×20 mm 9.7
70×10 mm 5.6
70×20 mm 11.
75×6 mm 3.6
80×6 mm 3.9
80×8 mm 5.2
80×10 mm 6.5
80×12 mm 7.6
80×20 mm 12.9
100×6 mm 4.9
100×8 mm 6.4
100×10 mm 8.1
100×12 mm 9.7
100×15 mm 11.8
100×20 mm 16.

 

View stock list

Material Weight Calculator

Hardness conversion

PREN Calculator

ksi / MPa converter

Equivalent Standards

  • EN 1.4404 / 1.4401
  • UNS S31603 / S31600
  • ASTM 316L / 316
  • AISI 316L / 316
Tags: Plate / Profile / Round Bar & Bored Bar