The grade is developed from the standard 13Cr grade and offer enhanced mechanical properties and corrosion resistance. The low carbon improves weldability whilst maintaining the martensitic microstructure.

BGH s13Cr-110 ksi has been qualified according to NACE 0175-3 annex B and NORSOK M650. General hardness requirement is 32 HRC. From surface to 3mm below surface 33 HRC is qualified and approved.

  • Applications

  • Heat Treatment & Weldability

  • Chemical Composition

  • Product Standards & Approvals

  • Mechanical Properties

Stocked products and dimensions