EN 1.4162 / LEAN DUPLEX UNS S32101 / LDX 2101
MATERIAL DESCRIPTION OF LDX 2101
LDX 2101 is a low Ni-alloyed duplex stainless steel with balanced chemistry of chromium, molybdenum and nitrogen content to achieve good resistance to localized and uniform corrosion. The Duplex microstructure contributes to the high strength and high resistance to stress corrosion cracking. Duplex stainless steel have good weldability. Due to risk of embrittlement, LDX 2101 should not be used at temperatures above 250°C. Very price stable high strength alloy.
PRE value (%Cr + 3.3%Mo + 16%N) of ≥26
Applications
The main applications are for details with corrosion resistance better than 304L.
LDX 2101 is characterized by:
• Ideal for tank production where corrosion strength is sufficient.
• Good resistance to stress corrosion cracking.
• Good resistance to general corrosion.
• High mechanical strength.
• High resistance to erosion corrosion and corrosion fatigue.
Heat Treatment
Solution annealing at 1020 – 1100°C followed by water quenching.
Weldability
Very good.
Chemical composition
Weight % | C | Si | Mn | S | P | Cr | Ni | Mo | N | Cu |
Min. | 4,00 | 21,00 | 1,35 | 0,1 | 0,20 | 0,10 | ||||
Max. | 0,040 | 1,00 | 6,00 | 0,015 | 0,035 | 22,00 | 1,90 | 0,8 | 0,25 | 0,80 |
Heat Treatment
EN 10088-2, EN 10088–4, ASTM A240, EN ISO 9445-2
Approvals
NACE MR0175/ ISO 15156-3:2015, PED 97/ 23/ EC, CPR 305/ 2011/ EU
Mechanical properties
Yield strength Rp0.2, MPa |
Tensile strength Rm, MPa |
Elongation [%] |
Hardness [HB] |
Impact, Charpy-V, -40ºC [J] |
Pre | Surface | |
PLATE CR (COIL) | ≥ 530 | ≥ 700 | ≥ 30 | ≥ 50 | 26 | 2B/2E | |
PLATE HR (COIL) | ≥ 450 | ≥ 650 | ≥ 30 | ≤ 290 | ≥ 50 | 26 | 1D |
PLATE (QUARTO) | ≥ 450 | ≥ 650 | ≥ 30 | ≤ 290 | ≥ 27 | 26 | 1D |
Plate stock
MEASUREMENTS | KG/PLATE |
---|---|
1 X 2000 X 6000 MM | 96 |
1,5 X 2000 X 6000 MM | 144 |
2 X 2000 X 6000 MM | 192 |
2,5 X 2000 X 6000 MM | 240 |
3 X 2000 X 6000 MM | 288 |
4 X 2000 X 6000 MM | 384 |
5 X 2000 X 6000 MM | 480 |
6 X 2000 X 6000 MM | 576 |
8 X 2000 X 6000 MM | 791 |
10 X 2000 X 6000 MM | 988 |
12 X 2000 X 6000 MM | 1187 |
15 X 2000 X 6000 MM | 1483 |
20 X 2000 X 6000 MM | 1978 |
25 X 2000 X 6000 MM | 2472 |
30 X 2000 X 6000 MM | 2966 |
35 X 2000 X 6000 MM | |
40 X 2000 X 4000 MM | 2637 |
45 X 2000 X 4000 MM | |
50 X 2000 X 4000 MM | 3296 |
60 X 1500 X 6000 MM | 3296 |
Coil stock
1500 MM | 2000 MM |
---|---|
1,5 mm | 3 mm |
2 mm | 4 mm |
3 mm | 5 mm |
4 mm | 6 mm |
5 mm | |
6 mm |
Equivalent standards
- EN 1.4162
- UNS S32101
- LDX 2101